What is RoHS?
RoHS is the acronym for Restriction of Hazardous Substances. RoHS, also known as Directive 2002/95/EC, originated in the European Union and restricts the use of specific hazardous materials found in electrical and electronic products. All applicable products in the EU market after July 1, 2006 must pass RoHS compliance.

What are the restricted materials mandated under RoHS?
The substances banned under RoHS are lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (CrVI), polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE).

Why is RoHS compliance important?
The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

How are products tested for RoHS compliance?
Portable RoHS analyzers, also known as X-ray fluorescence or XRF metal analyzers, are used for screening and verification of RoHS compliance.

Which companies are affected by the RoHS Directive?
Any business that sells applicable electronic products, sub-assemblies or components directly to EU countries, or sells to resellers, distributors or integrators that in turn sell products to EU countries, is impacted if they utilize any of the restricted materials.
 
   
 
       
   

FIXED PRINTED CIRCUIT BOARD TERMINAL BLOCKS

04110SM INDUSTRY STANDARD SOLID MOLD CONNECTOR
Click on image to enlarge

04110SM INDUSTRY STANDARD SOLID MOLD CONNECTOR
Click on image to enlarge

04110SM INDUSTRY STANDARD SOLID MOLD CONNECTOR

10MM

Our LMI solid mold connector is available in 2 - 12 poles, with a PIN spacing of 10 mm is able to handle high voltages of up to 300V using high current levels up to 14 Amps. Each connector is very versatile and can flexibly accept from 30 to 14 AWG wire. This connector is solidly constructed and has been rigorously tested and is approved by the UL/CSA and IMQ/VDE.

These connectors are ideal for and widely used in Industrial Controls, Process Control and Data Acquisition applications.

The screw connection from LMI connector is currently in use in millions of applications all over the world and all share the following properties:
Designed to provide Safety and to be Secure
Easy to understand operation
Proven reliability against screws becoming loose from their connections
LMI products perform superbly with either solid or stranded wire
The connector block has a small foot print, is ruggedly built and is rated to withstand up to 85 degrees centigrade. This connector is very safe and fabricated from the material: PC which has a flame ability rating UL94V0.

Each connector is soldered to the circuit board and easily connects to wires using screws. The screw size is M2.5 and seated using 3 inch pounds of torque.

Sub-Category  INDUSTRY STANDARD
Version  SOLID MOLD
Max. # of Pos.  12
Pitch/Pin Spacing  10MM
Voltage  300
Amperage  14
Wire AWG  30-14
Torque  3 IN/LB
Screw Size  M2.5
Temperature Rating  85c
Insulating Material  PC (UL94VO)
Approvals  UL /cUL
Standard Color  GREY